Dive Rite Cuts The Cable With Their LX20 Handheld Light

Dive Rite, LX20, scuba diving light, handheld torch, Lamar Hires, Jared Hires, Lee Ann Hires, Rosemary E Lunn, Roz Lunn, The Underwater Marketing Company, Lithium Ion rechargeable battery, LUX, QRM, quick release mount, burn time, rebreather diving,

Dive Rite, the Floridian leading technical diving equipment manufacturer, has augmented their lighting range with the launch of the LX20. This handheld primary light has been created to suit any diver; be they entry level, an experienced recreational diver, a cave or a technical diver.

Divers tend to build a relationship with their equipment and it can sometimes be quite sad when you hang up something for the last time because your diving needs have outgrown it. Dive Rite has recognised this trend and developed a primary torch that will match its owners experience through out their diving career.
Dive Rite, equipment for serious divers, sidemount system, Lamar Hires, Rosemary E Lunn, Roz Lunn, The Underwater Marketing Company, scuba diving, rebreather diving

The LX20 is compact and light, weighting in at a mere 0.56 kg, making it the perfect size to dive either handheld, on mounted on the hand using Dive Rite's QRM (quick release mount) soft hand mount. And it seems this light easily outshines most corded primary lights on the market today because the LX20 delivers 20,000 LUX via an impressive  6° concentrated light beam for 4 hours on high power.

This little light has a depth rating of 500 ft / 152 m. And it has been designed to withstand the rigours of diving. The rotary magnetic on/off switch and a double o-ring seal body provides proven protection against flooding.

In summary it looks as though the LX20 is a versatile primary diving light with a good burn time -small in size and big on brightness.

 

Wanted! A Backplate As Strong As Steel, With The Weight Of Ali

It would seem that Dive Rite has the answer with the launch of their next generation backplate, the XT Lite.

Spotted at New York's 2015 Beneath The Sea Dive Show, this eye catching backplate is manufactured from marine grade 316 stainless steel. (316 is the preferred steel for use in marine environments because it has a greater resistance to corrosion, hence surgical steel is also made from 316 grade stainless).

Dive Rite, Lamar Hires, Jared Hires, XT Lite Backplate, Rosemary E Lunn, Roz Lunn, The Underwater Marketing Company, twinset, diving doubles, scuba diving, technical diving, Florida cave diving

Dive Rite has a simple solution. They have lost the excess weight, whilst ensuring the strength of the backplate is not compromised, by laser cutting a series of cut-outs from the body of the plate. The plate is then hand finished to ensure that there are no rough or jagged edges.

It is good to see that the Dive Rite has considered that divers have changing needs for their kit. The XT Lite backplate has two sets of 2 inch slots cut along the centre spine so that the plate can be dived with a single cylinder without the need of a single tank adapter. Plus a series of 3/8 inch holes and 1 inch slots have also been cut along the outer edge of the plate, thus giving the diver a plethora of choice when it comes to mounting lights, lift bags, pony bottles and other paraphernalia. And the ever useful crotch strap has not been forgotten either. There is a slot cut for that too.

As you would expect, Dive Rite have complied with the standard twinset / doubles bolt setup measurement of 11 inches between the two holes. But that is no surprise. Dive Rite introduced this measurement back in 1984 when it started manufacturing backplates. This measurement was then adopted by the tech community.

First Published: X-Ray MagazineMay 2015 Issue 66, Page 51